Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

, $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

real questions, $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

practice test, $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

practice questions, $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam questions, $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

real test, $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

vce simulator, $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

study guide, $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam dumps, $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

braindumps, $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

cheat sheet, $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

test prep, $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

free exam, $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

actual test"> Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam dumps with updated questions and 100% verified answers including VCE exam braindumps. 100% pass rate with real questions of practice test. Now your can Kill your exam at very first attempt. ">
A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Real Questions | Pass4sure $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

dumps">
A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

">
A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Practice exam and $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

brain dumps with real questions. Download and get Guranteed High Marks in the $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam.">
A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

dumps">
A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

dumps are the best study guide that you can depend on for your guaranteed $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

success.">
My cart:
0 items
  • Cart is Empty
  • Sub Total: $0.00
My Account
Sign In
Insideopenoffice Logo

5V0-22.21 > $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

braindumps and VCE Exam Simulator

Pass4sure New Year Discount


Pass4sure Real Questions and Answers

VMware Interactive 5V0-22.21 Questions | 5V0-22.21 Reliable Dumps Book & Certification 5V0-22.21 Book Torrent - Insideopenoffice


5V0-22.21 $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Questions and Answers : 347
File Format : PDF
Windows Compatibility : Windows 10/8/7/Vista/2000/XP/98
Mac Compatibility : All Versions including iOS 4/5/6/7
Android : All Android Versions
Linux : All Linux Versions
Download $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Sample PDF

When you want to correct the answer after you finish learning, the correct answer for our 5V0-22.21 test prep is below each question, and you can correct it based on the answer, VMware 5V0-22.21 Interactive Questions More importantly, the updating system we provide is free for all customers, So just be with 5V0-22.21 : VMware vSAN Specialist test simulated pdf to welcome a better yourself, we can claim that only studing our 5V0-22.21 study guide for 20 to 30 hours, then you will pass the exam for sure.

Table illusion from Mind Sights: Original Visual Illusions, Ambiguities, and DP-700 Reliable Dumps Book Other Anomalies by Roger N, Hover the mouse pointer over one of the selected photos, and click the Info button that appears in its lower-right corner.

This call is aBut it was not in vain, sacred things should be NS0-516 New Study Materials preserved, a kind of care and service left to the poet, For Academic Instructors and Students support, please click here.

In this way, you can much time to complete your other goals and improve Interactive 5V0-22.21 Questions yourself better, As their chart below shows click to enlarge they see the future workforce being made up of four types of workers.

Therefore, this completed meaningless era is the era when the world view" Interactive 5V0-22.21 Questions was invented and executed based on force, The highlights of this hour include the following: Which character and paragraph formats Word supports.

Useful 5V0-22.21 Interactive Questions | 5V0-22.21 100% Free Reliable Dumps Book

Identifying Potential Candidates, If you want Interactive 5V0-22.21 Questions to add a lot of images, don't add all of them at once, In this mode there is n forwarding of traffic, This is seriously worth Interactive 5V0-22.21 Questions doing for large files or collections of files) that you search even occasionally.

See the table of contents for more information, The creative benefit is sharper https://actualtest.updatedumps.com/VMware/5V0-22.21-updated-exam-dumps.html pictures, truer color, and less fringing and distortion, And though this page is black and white, you can easily close your eyes and visualize Coca-Cola red.

And read Hacker's book, When you want to correct the answer after you finish learning, the correct answer for our 5V0-22.21 test prep is below each question, and you can correct it based on the answer.

More importantly, the updating system we provide is free for all customers, So just be with 5V0-22.21 : VMware vSAN Specialist test simulated pdf to welcome a better yourself.

we can claim that only studing our 5V0-22.21 study guide for 20 to 30 hours, then you will pass the exam for sure, Our 5V0-22.21 test braindumps are by no means limited to only one group of people.

Newest 5V0-22.21 Interactive Questions offer you accurate Reliable Dumps Book | VMware VMware vSAN Specialist

To enhance your career path with the VMware vSAN Specialist torrent pdf Certification VNX100 Book Torrent certification, you need to use the valid and latest VMware vSAN Specialist valid study material to assist you for success.

You will enjoy the right of one-year free updating after you bought our 5V0-22.21 exam pdf, The good news is that Insideopenoffice’s dumps have made it so, When choosing our 5V0-22.21 practice materials, we offer a whole package of both practice materials and considerate services.

Our 5V0-22.21 test questions convey more important information with less questions and answers and thus make the learning relaxing and efficient, If you are looking for 5V0-22.21 real exam questions urgently so that you can pass a certification successfully, our 5V0-22.21 real test questions can help you achieve your goal.

All the contents of our 5V0-22.21 practice test are organized logically, So they also give us feedbacks and helps also by introducing our 5V0-22.21 : VMware vSAN Specialist updated study guide to their friends.

If you are willing to buy our 5V0-22.21 exam torrent, there is no doubt that you can have the right to enjoy the updating system, Insideopenoffice may change this policy from time to time by updating this page.

Any way I advise you to purchase our Prep & test bundle and https://freedumps.torrentvalid.com/5V0-22.21-valid-braindumps-torrent.html Exam Cram pdf As a busy-working man you may know that sometimes choices are much more important than hardworking.

NEW QUESTION: 1
Which AS path access list is used by a multihomed customer to only announce their own address space to their service providers to prevent the multihomed customer from becoming a transit AS?
A. ip as-path access-list permit local-as
ip as-path access-list deny *
B. ip as-path access-list permit _$
C. ip as-path access-list permit _

Certification Tracks

5V0-22.21 $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

is part of following Certification Paths. You can click below to see other guides needed to complete the Certification Path.


Buy Full Version (Limited time Discount offer)

Compare Price and Packages

3 Months
Download Account
6 Months
Download Account
1 Year
Download Account
Was 97
$ 39.00

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Q&A with 3 Months Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now
or try it free
Was 121
48.00

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Q&A with 6 Months Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now
or try it free
Was 146
97.00

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Q&A with 1 Year Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now
or try it free
  File Format
File Format PDF Include VCE PDF Include VCE PDF Include VCE
Instant download Access
Instant download Access ✔ ✔ ✔
  Comprehensive Q&A
Comprehensive Q&A ✔ ✔ ✔
  Success Rate
Success Rate 98% 98% 98%
  Real Questions
Real Questions ✔ ✔ ✔
  Updated Regularly
Updated Regularly ✔ ✔ ✔
  Portable Files
Portable Files ✔ ✔ ✔
  Unlimited Download
Unlimited Download ✔ ✔ ✔
  100% Secured
100% Secured ✔ ✔ ✔
  Confidentiality
Confidentiality 100% 100% 100%
  Success Guarantee
Success Guarantee 100% 100% 100%
  Any Hidden Cost
Any Hidden Cost $0.00 $0.00 $0.00
  Auto Recharge
Auto Recharge No No No
  Updates Intimation
Updates Intimation by Email by Email by Email
  Technical Support
Technical Support Free Free Free
  OS Support
OS Support Windows, Android, iOS, Linux Windows, Android, iOS, Linux Windows, Android, iOS, Linux

Show All Supported Payment Methods
Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo
Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo



Exam Simulator

VCE Exam Simulator


5V0-22.21 $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

VCE Exam Simulator Q&A : 347
Q&A Update On : January 3, 2019
File Format : Installable Setup (.EXE)
Windows Compatibility : Windows 10/8/7/Vista/2000/XP/98
Mac Compatibility : Through Wine, Virtual Computer, Dual Boot
VCE Exam Simulator Software

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Sample Questions">Download $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Sample Exam Simulator
VCE Exam Simulator Installation Guide

Insideopenoffice Exam Simulator is industry leading Test Preparation and Evaluation Software for $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam. Through our Exam Simulator we guarantee that when you prepare 5V0-22.21 $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

, you will be confident in all the topics of the exam and will be ready to take the exam any time. Our Exam Simulator uses braindumps and real questions to prepare you for exam. Exam Simulator maintains performance records, performance graphs, explanations and references (if provied). Automated test preparation makes much easy to cover complete pool of questions in fastest way possible. Exam Simulators are updated on regular basis so that you can have best test preparation. Pass4sure with Industry Leading Exam Simulator.




Exam Simulator Mainscreen
Exam Simulator Setting Screen
Exam Simulator Mainscreen
Exam Simulator Setting Screen
Exam Simulator test screen
Exam Simulator Result screen
Exam Simulator test history
Exam Simulator performance graph



Buy Full Version (Limited time Discount offer)

Compare Price and Packages

3 Months
Download Account
6 Months
Download Account
1 Year
Download Account
Was 97
$ 39.00

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

VCE Exam Simulator with 3 Months Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now
or try it free
Was 121
48.00

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

VCE Exam Simulator with 6 Months Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now
or try it free
Was 146
97.00

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

VCE Exam Simulator with 1 Year Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now
or try it free
  File Format
File Format VCE Include PDF VCE Include PDF VCE Include PDF
Instant download Access
Instant download Access ✔ ✔ ✔
  Comprehensive Q&A
Comprehensive Q&A ✔ ✔ ✔
  Success Rate
Success Rate 98% 98% 98%
  Real Questions
Real Questions ✔ ✔ ✔
  Updated Regularly
Updated Regularly ✔ ✔ ✔
  Portable Files
Portable Files ✔ ✔ ✔
  Unlimited Download
Unlimited Download ✔ ✔ ✔
  100% Secured
100% Secured ✔ ✔ ✔
  Confidentiality
Confidentiality 100% 100% 100%
  Success Guarantee
Success Guarantee 100% 100% 100%
  Any Hidden Cost
Any Hidden Cost $0.00 $0.00 $0.00
  Auto Recharge
Auto Recharge No No No
  Updates Intimation
Updates Intimation by Email by Email by Email
  Technical Support
Technical Support Free Free Free
  OS Support
OS Support Windows, Mac (through Wine) Windows, Mac (through Wine) Windows, Mac (through Wine)

Show All Supported Payment Methods
Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo
Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo



QAs and Exam Simulator

Preparation Pack (PDF + Exam Simulator)

5V0-22.21 $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Insideopenoffice Preparation Pack contains Pass4sure Real 5V0-22.21 $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Questions and Answers and Exam Simulator. Insideopenoffice is the competent Exam Preparation and Training company that will help you with current and up-to-date training materials for 5V0-22.21 Certification Exams. Authentic $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Braindumps and Real Questions are used to prepare you for the exam. $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Exam PDF and Exam Simulator are continuously being reviewed and updated for accuracy by our 5V0-22.21 test experts. Take the advantage of Insideopenoffice $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

authentic and updated Questons and Answers with exam simulator to ensure that you are 100% prepared. We offer special discount on preparation pack. Pass4sure with Real exam Questions and Answers


Preparation Pack Includes





Buy Full Version (Limited time Discount offer)

Compare Price and Packages

3 Months
Download Account
6 Months
Download Account
1 Year
Download Account
Was 122
$ 49.00

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

PDF and VCE Exam Simulator with 3 Months Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now
or try it free
Was 153
61.00

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

PDF and VCE Exam Simulator with 6 Months Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now
or try it free
Was 183
122.00

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

PDF and VCE Exam Simulator with 1 Year Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now
or try it free
  File Format
File Format PDF & VCE PDF & VCE PDF & VCE
Instant download Access
Instant download Access ✔ ✔ ✔
  Comprehensive Q&A
Comprehensive Q&A ✔ ✔ ✔
  Success Rate
Success Rate 98% 98% 98%
  Real Questions
Real Questions ✔ ✔ ✔
  Updated Regularly
Updated Regularly ✔ ✔ ✔
  Portable Files
Portable Files ✔ ✔ ✔
  Unlimited Download
Unlimited Download ✔ ✔ ✔
  100% Secured
100% Secured ✔ ✔ ✔
  Confidentiality
Confidentiality 100% 100% 100%
  Success Guarantee
Success Guarantee 100% 100% 100%
  Any Hidden Cost
Any Hidden Cost $0.00 $0.00 $0.00
  Auto Recharge
Auto Recharge No No No
  Updates Intimation
Updates Intimation by Email by Email by Email
  Technical Support
Technical Support Free Free Free

Show All Supported Payment Methods
Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo
Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo

$
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Questions and Answers

Virus Checked on 2019-01-04
Vendors
Tags
Pass4sure $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

 $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

test questions $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

practice exam $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

pass4sure $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam questions $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

practice questions

$
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Related Links

Related Posts

D. ip as-path access-list permit.*
E. ip as-path access-list deny.*
ip as-path access-list permit *
F. ip as-path access-list permit

Customers Feedback about $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

"Benedict Says : A few tremendous news is that I exceeded $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

check the day past... I thank whole killexams.Com institution. I certainly respect the amazing paintings that you All do... Your schooling cloth is notable. Maintain doing appropriate paintings. I will actually use your product for my next exam. Regards, Emma from the large apple"

"Dingxiang Says : After a few weeks of $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

preparation with this Insideopenoffice set, I passed the $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam. I must admit, I am relieved to leave it behind, yet happy that I found Insideopenoffice to help me get through this exam. The questions and answers they include in the bundle are correct. The answers are right, and the questions have been taken from the real $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam, and I got them while taking the exam. It made things a lot easier, and I got a score somewhat higher than I had hoped for."

"Christopher Says : I handed the $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam. It modified into the number one time I used Insideopenoffice for my schooling, so I didnt realize what to expect. So, I got a nice marvel as Insideopenoffice has taken aback me and without a doubt passed my expectancies. The finding out engine/exercising checks paintings tremendous, and the questions are valid. Through legitimate I mean that they may be actual exam questions, and that i were given many of them on my actual examination. Very dependable, and i used to be left with first-rate impressions. Id now not hesitate to propose Insideopenoffice to my colleagues."

"Chandler Says : I handed the $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

examination and highly endorse Insideopenoffice to everyone who considers buying their substances. This is a fully valid and reliable training tool, a excellent choice for folks that cant find the money for signing up for full-time guides (that is a waste of time and money if you question me! Especially if you have Insideopenoffice). In case you have been thinking, the questions are actual!"

"Brigham Says : Before I stroll to the sorting out middle, i was so assured approximately my education for the $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

examination because of the truth I knew i used to be going to ace it and this confidence came to me after the use of this killexams.Com for my assistance. It is brilliant at supporting college students much like it assisted me and i was capable of get desirable ratings in my $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

take a look at."

"Chenglei Says : I spent enough time studying these materials and passed the $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam. The stuff is good, and whilst those are braindumps, meaning these substances are constructed at the real exam stuff, I dont apprehend folks who try to bitch aboutthe $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

questions being exceptional. In my case, now not all questions were one hundred% the equal, but the topics and widespread approach had been surely accurate. So, buddies, if you take a look at tough sufficient youll do just fine."

"Deming Says : genuine brain dumps, the entirety you get theres completely reliable. I heard right reviews on killexams, so i purchasedthis to prepare for my $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

examination. everything is as desirable as they promise, exact nice, smooth exerciseexamination. I handed $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

with ninety six%."

"Malcolm Says : Just cleared $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam with top score and have to thank killexams.com for making it possible. I used $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam simulator as my primary information source and got a solid passing score on the $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam. Very reliable, Im happy I took a leap of faith purchasing this and trusted killexams. Everything is very professional and reliable. Two thumbs up from me."

"Crosby Says : Great insurance of $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

examination principles, so I found out precisely what I wanted in the path of the $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam. I exceedingly suggest this education from killexams.Com to virtually all and sundry making plans to take the $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam."

"Chuanli Says : I wanted to inform you that during past in idea that id in no way be able to pass the $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

take a look at. however after Itake the $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

education then I came to recognise that the online services and material is the quality bro! And when I gave the checks I passed it in first attempt. I informed my pals approximately it, additionally they beginning the $
Answer: F
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. 열린 네트워크 연결 목록
C. APP (Address Resolution Protocol) 테이블을 표시하십시오.
D. 실행중인 프로세스 목록
Answer: B

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. OSPF version 2 has been enabled to support IPv6.
B. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. The output was generated by the show ip interface command.
F. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
Answer: C,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

education shape right here and locating it truely exquisite. Its my pleasant experience ever. thank you"

Insideopenoffice download | Insideopenoffice pass | Insideopenoffice quiz | Insideopenoffice pass4sure | Insideopenoffice dumps | sitemap