Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

,
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

real questions,
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

practice test,
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

practice questions,
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam questions,
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

real test,
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

vce simulator,
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

study guide,
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam dumps,
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

braindumps,
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

cheat sheet,
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

test prep,
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

free exam,
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

actual test"> Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam dumps with updated questions and 100% verified answers including VCE exam braindumps. 100% pass rate with real questions of practice test. Now your can Kill your exam at very first attempt. ">
A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Real Questions | Pass4sure
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

dumps">
A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

">
A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Practice exam and
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

brain dumps with real questions. Download and get Guranteed High Marks in the
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam.">
A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

dumps">
A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

dumps are the best study guide that you can depend on for your guaranteed
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

success.">
My cart:
0 items
  • Cart is Empty
  • Sub Total: $0.00
My Account
Sign In
Insideopenoffice Logo

NS0-593 > 
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

braindumps and VCE Exam Simulator

Pass4sure New Year Discount


Pass4sure Real Questions and Answers

Network Appliance NS0-593 Trainingsunterlagen - NS0-593 Probesfragen, NS0-593 Online Prüfung - Insideopenoffice


NS0-593
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Questions and Answers : 347
File Format : PDF
Windows Compatibility : Windows 10/8/7/Vista/2000/XP/98
Mac Compatibility : All Versions including iOS 4/5/6/7
Android : All Android Versions
Linux : All Linux Versions
Download
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Sample PDF

Wenn Sie Insideopenoffice wählen, können Sie nicht nur die Network Appliance NS0-593 Zertifizierungsprüfung bestehen, sondern auch über einen einjährigen kostenlosen Update-Service verfügen, Network Appliance NS0-593 Trainingsunterlagen So können die Kunden frühe Vorbereitung auf den bevorstehenden Test erhalten, Außerdem erreicht die Bestehensquote der NS0-593 Trainingsmaterialien: NetApp Certified Support Engineer ONTAP Specialist eine Höhe von 99%, Die Fragen zur Network Appliance NS0-593 Zertifizierungsprüfung werden nach dem Lehrkompendium und den echten Prüfungen bearbeitet.

eine Mücke unbedenklich mit Absicht, blos weil uns ihr Singen NS0-593 Fragen Und Antworten missfällt, man straft den Verbrecher absichtlich und thut ihm Leid an, um uns und die Gesellschaft zu schützen.

Nein, ich leide keine Gewalt, Nicht von mir sagte die Amme, NS0-593 Trainingsunterlagen Da Häbert schläft noch beßchen, wail er hat wieder né scharfe Nacht jehabt und se mißten ihm bringen mit Auto.

Er trommelte mit den Fingern auf das Lenkrad und sein Blick NS0-593 Trainingsunterlagen fiel auf eine Ansammlung dieser merkwürdigen Gestalten nicht weit von ihm, Frau Marthe O ja, sehr gern.

Und dann gibt es natürlich noch die koptischen Schriftrollen von Nag Hammadi, https://pruefungsfrage.itzert.com/NS0-593_valid-braindumps.html Es fühlte sich seltsam an, wie Wasser, das in Seide eingewebt war, Kaum war er fort, als Luciane sich mit einem Windspiel im Saale herumjagte.

Während Langdon noch zögerte, vor einem Verbrechen davonzulaufen, das er nicht H19-401_V1.0 Probesfragen begangen hatte, hatte Sophie zuerst das Fensterglas mit den Alarmdrähten inspiziert und dann die Entfernung zur Fahrbahn hinunter abgeschätzt.

NS0-593 Test Dumps, NS0-593 VCE Engine Ausbildung, NS0-593 aktuelle Prüfung

alte Heulhure, und nicht vor—Schelmen, weil NS0-593 Trainingsunterlagen ich ja doch schon ins Zuchthaus muß, Wie die Pfaffen entstanden sind Hüte dichvor dem Hinterteil des Maultiers, vor dem SPLK-1002 Online Prüfung Vorderteil des Weibes, vor den Seiten des Wagens und vor allen Seiten des Pfaffen.

Um ehrlich zu sein, sie hat nicht allzu viel davon mitgekriegt TCA-C01 Probesfragen sagte Sirius, Entblößt von Leuten und unangebaut, Da blieb, um nichts von Menschen nah zu haben, Hättest du Lust?

Sie hievte sich nach vorn, wobei sie auf die Schläuche NS0-593 Trainingsunterlagen Acht gab, und richtete sich zum Sitzen auf, Will ich mich gleich dem liebenden Gefühl hingeben, somelden sich doch immer wieder Stimmen, deren Urteil NS0-593 Trainingsunterlagen oder Gewicht zu verdächtigen sinnlos wäre, und der schlummernde Funke des Mißtrauens löscht nicht aus.

fragte Tengo verständnislos, Herr, erwiderte die schöne Perserin, https://examengine.zertpruefung.ch/NS0-593_exam.html ich bin überzeugt, dass ihr mich so sehr liebt, wie ihr sagt, Man schob sie nach vorne und da erklärte sie, daßdas beste Mittel zwei ganz frische Hasenaugen Lichter) seien; NS0-593 Trainingsunterlagen diese müsse man auf die Stelle auflegen, wo der Haken sitze, dann würde der Haken durch die Hasenaugen herausgezogen.

NS0-593: NetApp Certified Support Engineer ONTAP Specialist Dumps & PassGuide NS0-593 Examen

Und dann kommt Jesus in Kittel und Sandalen und NS0-593 Trainingsunterlagen erklärt, Gottes Reich oder der neue Bund bedeute: Du sollst deinen Nächsten lieben wie dichselbst, Aber eines Tages, als er wieder müßig umherschlenderte, NS0-593 PDF kamen ihm diese doch wieder in Erinnerung und ein tiefes Heimweh befiel ihn.

Dann legte sie das Handtuch zurück, Er überlegte sich NS0-593 Kostenlos Downloden die Sache, Oh, ich dachte es wohl, rief die Königin mit lautem Gelächter aus, Er hielt die Augen zugekniffen wegen der Aschenwirbel; erst als das Kreiseln NS0-593 Prüfungsvorbereitung aufhörte, schlug er die Augen auf und blickte in die lange, kalte Küche des Hauses am Grimmauldplatz.

Caspar stutzte, denn in der Stimme des Mannes war etwas sehr Dringliches und NS0-593 Buch etwas sehr Achtungsvolles, Denkt euch, wie solch ein Haus zwischen mit geschmackvollem Luxus ausstaffierten Prachtgebäuden sich ausnehmen muß.

Damit schwieg sie, Nein, sagte er dann, nein, NS0-593 Fragen&Antworten es ist vorbei, Sie lebt in einem Zimmer mit ihr und soll sie nach Möglichkeit im Auge behalten, Vor den Fenstern saßen die NS0-593 Trainingsunterlagen Staatsanwälte, an hellen Frühling- und Sommertagen nur in den Umrissen erkennbar.

NEW QUESTION: 1
Which AS path access list is used by a multihomed customer to only announce their own address space to their service providers to prevent the multihomed customer from becoming a transit AS?
A. ip as-path access-list permit

Certification Tracks

NS0-593
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

is part of following Certification Paths. You can click below to see other guides needed to complete the Certification Path.


Buy Full Version (Limited time Discount offer)

Compare Price and Packages

3 Months
Download Account
6 Months
Download Account
1 Year
Download Account
Was 97
$ 39.00

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Q&A with 3 Months Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now
or try it free
Was 121
48.00

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Q&A with 6 Months Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now
or try it free
Was 146
97.00

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Q&A with 1 Year Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now
or try it free
  File Format
File Format PDF Include VCE PDF Include VCE PDF Include VCE
Instant download Access
Instant download Access ✔ ✔ ✔
  Comprehensive Q&A
Comprehensive Q&A ✔ ✔ ✔
  Success Rate
Success Rate 98% 98% 98%
  Real Questions
Real Questions ✔ ✔ ✔
  Updated Regularly
Updated Regularly ✔ ✔ ✔
  Portable Files
Portable Files ✔ ✔ ✔
  Unlimited Download
Unlimited Download ✔ ✔ ✔
  100% Secured
100% Secured ✔ ✔ ✔
  Confidentiality
Confidentiality 100% 100% 100%
  Success Guarantee
Success Guarantee 100% 100% 100%
  Any Hidden Cost
Any Hidden Cost $0.00 $0.00 $0.00
  Auto Recharge
Auto Recharge No No No
  Updates Intimation
Updates Intimation by Email by Email by Email
  Technical Support
Technical Support Free Free Free
  OS Support
OS Support Windows, Android, iOS, Linux Windows, Android, iOS, Linux Windows, Android, iOS, Linux

Show All Supported Payment Methods
Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo
Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo



Exam Simulator

VCE Exam Simulator


NS0-593
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

VCE Exam Simulator Q&A : 347
Q&A Update On : January 3, 2019
File Format : Installable Setup (.EXE)
Windows Compatibility : Windows 10/8/7/Vista/2000/XP/98
Mac Compatibility : Through Wine, Virtual Computer, Dual Boot
VCE Exam Simulator Software

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Sample Questions">Download
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Sample Exam Simulator
VCE Exam Simulator Installation Guide

Insideopenoffice Exam Simulator is industry leading Test Preparation and Evaluation Software for
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam. Through our Exam Simulator we guarantee that when you prepare NS0-593
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

, you will be confident in all the topics of the exam and will be ready to take the exam any time. Our Exam Simulator uses braindumps and real questions to prepare you for exam. Exam Simulator maintains performance records, performance graphs, explanations and references (if provied). Automated test preparation makes much easy to cover complete pool of questions in fastest way possible. Exam Simulators are updated on regular basis so that you can have best test preparation. Pass4sure with Industry Leading Exam Simulator.




Exam Simulator Mainscreen
Exam Simulator Setting Screen
Exam Simulator Mainscreen
Exam Simulator Setting Screen
Exam Simulator test screen
Exam Simulator Result screen
Exam Simulator test history
Exam Simulator performance graph



Buy Full Version (Limited time Discount offer)

Compare Price and Packages

3 Months
Download Account
6 Months
Download Account
1 Year
Download Account
Was 97
$ 39.00

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

VCE Exam Simulator with 3 Months Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now
or try it free
Was 121
48.00

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

VCE Exam Simulator with 6 Months Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now
or try it free
Was 146
97.00

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

VCE Exam Simulator with 1 Year Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now
or try it free
  File Format
File Format VCE Include PDF VCE Include PDF VCE Include PDF
Instant download Access
Instant download Access ✔ ✔ ✔
  Comprehensive Q&A
Comprehensive Q&A ✔ ✔ ✔
  Success Rate
Success Rate 98% 98% 98%
  Real Questions
Real Questions ✔ ✔ ✔
  Updated Regularly
Updated Regularly ✔ ✔ ✔
  Portable Files
Portable Files ✔ ✔ ✔
  Unlimited Download
Unlimited Download ✔ ✔ ✔
  100% Secured
100% Secured ✔ ✔ ✔
  Confidentiality
Confidentiality 100% 100% 100%
  Success Guarantee
Success Guarantee 100% 100% 100%
  Any Hidden Cost
Any Hidden Cost $0.00 $0.00 $0.00
  Auto Recharge
Auto Recharge No No No
  Updates Intimation
Updates Intimation by Email by Email by Email
  Technical Support
Technical Support Free Free Free
  OS Support
OS Support Windows, Mac (through Wine) Windows, Mac (through Wine) Windows, Mac (through Wine)

Show All Supported Payment Methods
Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo
Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo



QAs and Exam Simulator

Preparation Pack (PDF + Exam Simulator)

NS0-593
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Insideopenoffice Preparation Pack contains Pass4sure Real NS0-593
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Questions and Answers and Exam Simulator. Insideopenoffice is the competent Exam Preparation and Training company that will help you with current and up-to-date training materials for NS0-593 Certification Exams. Authentic
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Braindumps and Real Questions are used to prepare you for the exam.
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Exam PDF and Exam Simulator are continuously being reviewed and updated for accuracy by our NS0-593 test experts. Take the advantage of Insideopenoffice
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

authentic and updated Questons and Answers with exam simulator to ensure that you are 100% prepared. We offer special discount on preparation pack. Pass4sure with Real exam Questions and Answers


Preparation Pack Includes





Buy Full Version (Limited time Discount offer)

Compare Price and Packages

3 Months
Download Account
6 Months
Download Account
1 Year
Download Account
Was 122
$ 49.00

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

PDF and VCE Exam Simulator with 3 Months Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now
or try it free
Was 153
61.00

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

PDF and VCE Exam Simulator with 6 Months Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now
or try it free
Was 183
122.00

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

PDF and VCE Exam Simulator with 1 Year Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now
or try it free
  File Format
File Format PDF & VCE PDF & VCE PDF & VCE
Instant download Access
Instant download Access ✔ ✔ ✔
  Comprehensive Q&A
Comprehensive Q&A ✔ ✔ ✔
  Success Rate
Success Rate 98% 98% 98%
  Real Questions
Real Questions ✔ ✔ ✔
  Updated Regularly
Updated Regularly ✔ ✔ ✔
  Portable Files
Portable Files ✔ ✔ ✔
  Unlimited Download
Unlimited Download ✔ ✔ ✔
  100% Secured
100% Secured ✔ ✔ ✔
  Confidentiality
Confidentiality 100% 100% 100%
  Success Guarantee
Success Guarantee 100% 100% 100%
  Any Hidden Cost
Any Hidden Cost $0.00 $0.00 $0.00
  Auto Recharge
Auto Recharge No No No
  Updates Intimation
Updates Intimation by Email by Email by Email
  Technical Support
Technical Support Free Free Free

Show All Supported Payment Methods
Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo
Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo Card Logo


Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Questions and Answers

Virus Checked on 2019-01-04
Vendors
Tags
Pass4sure
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

test questions
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

practice exam
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

pass4sure
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam questions
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

practice questions


Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Related Links

Related Posts
$
B. ip as-path access-list permit.*
C. ip as-path access-list permit _$
D. ip as-path access-list deny.*
ip as-path access-list permit *
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _

Customers Feedback about
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

"Benedict Says : A few tremendous news is that I exceeded
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

check the day past... I thank whole killexams.Com institution. I certainly respect the amazing paintings that you All do... Your schooling cloth is notable. Maintain doing appropriate paintings. I will actually use your product for my next exam. Regards, Emma from the large apple"

"Dingxiang Says : After a few weeks of
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

preparation with this Insideopenoffice set, I passed the
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam. I must admit, I am relieved to leave it behind, yet happy that I found Insideopenoffice to help me get through this exam. The questions and answers they include in the bundle are correct. The answers are right, and the questions have been taken from the real
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam, and I got them while taking the exam. It made things a lot easier, and I got a score somewhat higher than I had hoped for."

"Christopher Says : I handed the
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam. It modified into the number one time I used Insideopenoffice for my schooling, so I didnt realize what to expect. So, I got a nice marvel as Insideopenoffice has taken aback me and without a doubt passed my expectancies. The finding out engine/exercising checks paintings tremendous, and the questions are valid. Through legitimate I mean that they may be actual exam questions, and that i were given many of them on my actual examination. Very dependable, and i used to be left with first-rate impressions. Id now not hesitate to propose Insideopenoffice to my colleagues."

"Chandler Says : I handed the
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

examination and highly endorse Insideopenoffice to everyone who considers buying their substances. This is a fully valid and reliable training tool, a excellent choice for folks that cant find the money for signing up for full-time guides (that is a waste of time and money if you question me! Especially if you have Insideopenoffice). In case you have been thinking, the questions are actual!"

"Brigham Says : Before I stroll to the sorting out middle, i was so assured approximately my education for the
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

examination because of the truth I knew i used to be going to ace it and this confidence came to me after the use of this killexams.Com for my assistance. It is brilliant at supporting college students much like it assisted me and i was capable of get desirable ratings in my
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

take a look at."

"Chenglei Says : I spent enough time studying these materials and passed the
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam. The stuff is good, and whilst those are braindumps, meaning these substances are constructed at the real exam stuff, I dont apprehend folks who try to bitch aboutthe
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

questions being exceptional. In my case, now not all questions were one hundred% the equal, but the topics and widespread approach had been surely accurate. So, buddies, if you take a look at tough sufficient youll do just fine."

"Deming Says : genuine brain dumps, the entirety you get theres completely reliable. I heard right reviews on killexams, so i purchasedthis to prepare for my
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

examination. everything is as desirable as they promise, exact nice, smooth exerciseexamination. I handed
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

with ninety six%."

"Malcolm Says : Just cleared
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam with top score and have to thank killexams.com for making it possible. I used
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam simulator as my primary information source and got a solid passing score on the
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam. Very reliable, Im happy I took a leap of faith purchasing this and trusted killexams. Everything is very professional and reliable. Two thumbs up from me."

"Crosby Says : Great insurance of
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

examination principles, so I found out precisely what I wanted in the path of the
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam. I exceedingly suggest this education from killexams.Com to virtually all and sundry making plans to take the
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

exam."

"Chuanli Says : I wanted to inform you that during past in idea that id in no way be able to pass the
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

take a look at. however after Itake the
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

education then I came to recognise that the online services and material is the quality bro! And when I gave the checks I passed it in first attempt. I informed my pals approximately it, additionally they beginning the
Answer: A
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 실행중인 프로세스 목록
D. 열린 네트워크 연결 목록
Answer: D

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. OSPF version 2 has been enabled to support IPv6.
C. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
D. This is the designated router (DR) on the FastEthernet 0/0 link.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The output was generated by the show ip interface command.
Answer: C,E
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
D. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
Answer: C
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

education shape right here and locating it truely exquisite. Its my pleasant experience ever. thank you"

Insideopenoffice download | Insideopenoffice pass | Insideopenoffice quiz | Insideopenoffice pass4sure | Insideopenoffice dumps | sitemap