Sharing-and-Visibility-Architect E. ip as-path access-list permit local-as ip as-path access-list deny * F. ip as-path access-list permit _$ Answer: C Explanation: Explanation/Reference: Explanation: NEW QUESTION: 2 다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까? A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다. B. APP (Address Resolution Protocol) 테이블을 표시하십시오. C. 열린 네트워크 연결 목록 D. 실행중인 프로세스 목록 Answer: C NEW QUESTION: 3 Refer to the exhibit. What two statements are true? (Choose two.) <img src="ddb69ad7e8458f41627419148f3093c1.jpg"/> A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1 B. This is the designated router (DR) on the FastEthernet 0/0 link. C. OSPF version 2 has been enabled to support IPv6. D. The output was generated by the show ip interface command. E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command. F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808. Answer: E,F Explanation: OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network. The following describes the steps to configure OSPF for IPv6: <img src="bd497f138de97b1969ef3f874f992126.jpg"/> There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command. NEW QUESTION: 4 展示を参照してください。 <img src="9766a12643e134d71fc6a61b69d98826.jpg"/> ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？ A. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22 B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22 C. access-list 2699 permit udp 10.20.1.0 0.0.0.255 D. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255 Answer: D Explanation: Explanation Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255. exam dumps | Real E. ip as-path access-list permit local-as ip as-path access-list deny * F. ip as-path access-list permit _$ Answer: C Explanation: Explanation/Reference: Explanation: NEW QUESTION: 2 다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까? A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다. B. APP (Address Resolution Protocol) 테이블을 표시하십시오. C. 열린 네트워크 연결 목록 D. 실행중인 프로세스 목록 Answer: C NEW QUESTION: 3 Refer to the exhibit. What two statements are true? (Choose two.) <img src="ddb69ad7e8458f41627419148f3093c1.jpg"/> A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1 B. This is the designated router (DR) on the FastEthernet 0/0 link. C. OSPF version 2 has been enabled to support IPv6. D. The output was generated by the show ip interface command. E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command. F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808. Answer: E,F Explanation: OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network. The following describes the steps to configure OSPF for IPv6: <img src="bd497f138de97b1969ef3f874f992126.jpg"/> There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command. NEW QUESTION: 4 展示を参照してください。 <img src="9766a12643e134d71fc6a61b69d98826.jpg"/> ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？ A. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22 B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22 C. access-list 2699 permit udp 10.20.1.0 0.0.0.255 D. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255 Answer: D Explanation: Explanation Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255. Questions - Practice Test

Salesforce Sharing-and-Visibility-Architect Trainingsunterlagen - Sharing-and-Visibility-Architect Probesfragen, Sharing-and-Visibility-Architect Online Prüfung - Insideopenoffice

Sharing-and-Visibility-Architect
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 열린 네트워크 연결 목록
D. 실행중인 프로세스 목록
Answer: C

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. This is the designated router (DR) on the FastEthernet 0/0 link.
C. OSPF version 2 has been enabled to support IPv6.
D. The output was generated by the show ip interface command.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
Answer: E,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. access-list 2699 permit udp 10.20.1.0 0.0.0.255
D. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
Answer: D
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

CS0-003 Deutsch Prüfung
C-C4H51-2405 Probesfragen
300-810 Fragen Und Antworten
H13-527_V5.0 Antworten
GCX-WFM Testing Engine
1Z0-1095-23 Deutsch Prüfungsfragen
NSK100 Vorbereitung
H22-731_V1.0 Online Test
C_S4PPM_2021 Prüfung
250-589 Echte Fragen
MB-220 Testantworten
FC0-U71 Online Tests
API-577 Prüfungsfragen
H19-338_V3.0 Prüfungsmaterialien
API-510 Zertifizierung
C-S4CPB-2408 Zertifizierungsantworten
TCA-Tibco-BusinessWorks Testantworten
H13-511_V5.5 Online Test
C_C4H320_34 Deutsche
HPE0-V22 Ausbildungsressourcen
C_THR95_2311 Online Prüfung
MLS-C01 Zertifikatsdemo

Questions and Answers	: 347
File Format	: PDF
Windows Compatibility	: Windows 10/8/7/Vista/2000/XP/98
Mac Compatibility	: All Versions including iOS 4/5/6/7
Android	: All Android Versions
Linux	: All Linux Versions

Download
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 열린 네트워크 연결 목록
D. 실행중인 프로세스 목록
Answer: C

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. This is the designated router (DR) on the FastEthernet 0/0 link.
C. OSPF version 2 has been enabled to support IPv6.
D. The output was generated by the show ip interface command.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
Answer: E,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. access-list 2699 permit udp 10.20.1.0 0.0.0.255
D. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
Answer: D
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Sample PDF

Wenn Sie Insideopenoffice wählen, können Sie nicht nur die Salesforce Sharing-and-Visibility-Architect Zertifizierungsprüfung bestehen, sondern auch über einen einjährigen kostenlosen Update-Service verfügen, Salesforce Sharing-and-Visibility-Architect Trainingsunterlagen So können die Kunden frühe Vorbereitung auf den bevorstehenden Test erhalten, Außerdem erreicht die Bestehensquote der Sharing-and-Visibility-Architect Trainingsmaterialien: Salesforce Certified Sharing and Visibility Architect eine Höhe von 99%, Die Fragen zur Salesforce Sharing-and-Visibility-Architect Zertifizierungsprüfung werden nach dem Lehrkompendium und den echten Prüfungen bearbeitet.

eine Mücke unbedenklich mit Absicht, blos weil uns ihr Singen Sharing-and-Visibility-Architect Trainingsunterlagen missfällt, man straft den Verbrecher absichtlich und thut ihm Leid an, um uns und die Gesellschaft zu schützen.

Nein, ich leide keine Gewalt, Nicht von mir sagte die Amme, Sharing-and-Visibility-Architect Trainingsunterlagen Da Häbert schläft noch beßchen, wail er hat wieder né scharfe Nacht jehabt und se mißten ihm bringen mit Auto.

Er trommelte mit den Fingern auf das Lenkrad und sein Blick Sharing-and-Visibility-Architect Trainingsunterlagen fiel auf eine Ansammlung dieser merkwürdigen Gestalten nicht weit von ihm, Frau Marthe O ja, sehr gern.

Und dann gibt es natürlich noch die koptischen Schriftrollen von Nag Hammadi, Sharing-and-Visibility-Architect PDF Es fühlte sich seltsam an, wie Wasser, das in Seide eingewebt war, Kaum war er fort, als Luciane sich mit einem Windspiel im Saale herumjagte.

Während Langdon noch zögerte, vor einem Verbrechen davonzulaufen, das er nicht Sharing-and-Visibility-Architect Trainingsunterlagen begangen hatte, hatte Sophie zuerst das Fensterglas mit den Alarmdrähten inspiziert und dann die Entfernung zur Fahrbahn hinunter abgeschätzt.

Sharing-and-Visibility-Architect Test Dumps, Sharing-and-Visibility-Architect VCE Engine Ausbildung, Sharing-and-Visibility-Architect aktuelle Prüfung

alte Heulhure, und nicht vor—Schelmen, weil CIMAPRO19-CS3-1 Probesfragen ich ja doch schon ins Zuchthaus muß, Wie die Pfaffen entstanden sind Hüte dichvor dem Hinterteil des Maultiers, vor dem https://examengine.zertpruefung.ch/Sharing-and-Visibility-Architect_exam.html Vorderteil des Weibes, vor den Seiten des Wagens und vor allen Seiten des Pfaffen.

Um ehrlich zu sein, sie hat nicht allzu viel davon mitgekriegt Sharing-and-Visibility-Architect Trainingsunterlagen sagte Sirius, Entblößt von Leuten und unangebaut, Da blieb, um nichts von Menschen nah zu haben, Hättest du Lust?

Sie hievte sich nach vorn, wobei sie auf die Schläuche Sharing-and-Visibility-Architect Prüfungsvorbereitung Acht gab, und richtete sich zum Sitzen auf, Will ich mich gleich dem liebenden Gefühl hingeben, somelden sich doch immer wieder Stimmen, deren Urteil Sharing-and-Visibility-Architect Kostenlos Downloden oder Gewicht zu verdächtigen sinnlos wäre, und der schlummernde Funke des Mißtrauens löscht nicht aus.

fragte Tengo verständnislos, Herr, erwiderte die schöne Perserin, 300-635 Online Prüfung ich bin überzeugt, dass ihr mich so sehr liebt, wie ihr sagt, Man schob sie nach vorne und da erklärte sie, daßdas beste Mittel zwei ganz frische Hasenaugen Lichter) seien; Sharing-and-Visibility-Architect Trainingsunterlagen diese müsse man auf die Stelle auflegen, wo der Haken sitze, dann würde der Haken durch die Hasenaugen herausgezogen.

Sharing-and-Visibility-Architect: Salesforce Certified Sharing and Visibility Architect Dumps & PassGuide Sharing-and-Visibility-Architect Examen

Und dann kommt Jesus in Kittel und Sandalen und 200-301 Probesfragen erklärt, Gottes Reich oder der neue Bund bedeute: Du sollst deinen Nächsten lieben wie dichselbst, Aber eines Tages, als er wieder müßig umherschlenderte, https://pruefungsfrage.itzert.com/Sharing-and-Visibility-Architect_valid-braindumps.html kamen ihm diese doch wieder in Erinnerung und ein tiefes Heimweh befiel ihn.

Dann legte sie das Handtuch zurück, Er überlegte sich Sharing-and-Visibility-Architect Fragen Und Antworten die Sache, Oh, ich dachte es wohl, rief die Königin mit lautem Gelächter aus, Er hielt die Augen zugekniffen wegen der Aschenwirbel; erst als das Kreiseln Sharing-and-Visibility-Architect Buch aufhörte, schlug er die Augen auf und blickte in die lange, kalte Küche des Hauses am Grimmauldplatz.

Caspar stutzte, denn in der Stimme des Mannes war etwas sehr Dringliches und Sharing-and-Visibility-Architect Fragen&Antworten etwas sehr Achtungsvolles, Denkt euch, wie solch ein Haus zwischen mit geschmackvollem Luxus ausstaffierten Prachtgebäuden sich ausnehmen muß.

Damit schwieg sie, Nein, sagte er dann, nein, Sharing-and-Visibility-Architect Trainingsunterlagen es ist vorbei, Sie lebt in einem Zimmer mit ihr und soll sie nach Möglichkeit im Auge behalten, Vor den Fenstern saßen die Sharing-and-Visibility-Architect Trainingsunterlagen Staatsanwälte, an hellen Frühling- und Sommertagen nur in den Umrissen erkennbar.

NEW QUESTION: 1
Which AS path access list is used by a multihomed customer to only announce their own address space to their service providers to prevent the multihomed customer from becoming a transit AS?
A. ip as-path access-list deny.*
ip as-path access-list permit *
B. ip as-path access-list permit.*
C. ip as-path access-list permit

Certification Tracks

Sharing-and-Visibility-Architect
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

is part of following Certification Paths. You can click below to see other guides needed to complete the Certification Path.

Buy Full Version (Limited time Discount offer)

Compare Price and Packages


	3 Months Download Account	6 Months Download Account	1 Year Download Account
	Was 97 $ 39.00 A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1 B. This is the designated router (DR) on the FastEthernet 0/0 link. C. OSPF version 2 has been enabled to support IPv6. D. The output was generated by the show ip interface command. E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command. F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808. Answer: E,F Explanation: OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network. The following describes the steps to configure OSPF for IPv6: There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command. NEW QUESTION: 4 展示を参照してください。ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？ A. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22 B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22 C. access-list 2699 permit udp 10.20.1.0 0.0.0.255 D. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255 Answer: D Explanation: Explanation Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255. Q&A with 3 Months Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now or try it free	Was 121 48.00 A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1 B. This is the designated router (DR) on the FastEthernet 0/0 link. C. OSPF version 2 has been enabled to support IPv6. D. The output was generated by the show ip interface command. E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command. F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808. Answer: E,F Explanation: OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network. The following describes the steps to configure OSPF for IPv6: There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command. NEW QUESTION: 4 展示を参照してください。ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？ A. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22 B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22 C. access-list 2699 permit udp 10.20.1.0 0.0.0.255 D. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255 Answer: D Explanation: Explanation Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255. Q&A with 6 Months Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now or try it free	Was 146 97.00 A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1 B. This is the designated router (DR) on the FastEthernet 0/0 link. C. OSPF version 2 has been enabled to support IPv6. D. The output was generated by the show ip interface command. E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command. F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808. Answer: E,F Explanation: OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network. The following describes the steps to configure OSPF for IPv6: There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command. NEW QUESTION: 4 展示を参照してください。ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？ A. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22 B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22 C. access-list 2699 permit udp 10.20.1.0 0.0.0.255 D. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255 Answer: D Explanation: Explanation Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255. Q&A with 1 Year Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now or try it free
	File Format
File Format	PDF Include VCE	PDF Include VCE	PDF Include VCE
	Instant download Access
Instant download Access	✔	✔	✔
	Comprehensive Q&A
Comprehensive Q&A	✔	✔	✔
	Success Rate
Success Rate	98%	98%	98%
	Real Questions
Real Questions	✔	✔	✔
	Updated Regularly
Updated Regularly	✔	✔	✔
	Portable Files
Portable Files	✔	✔	✔
	Unlimited Download
Unlimited Download	✔	✔	✔
	100% Secured
100% Secured	✔	✔	✔
	Confidentiality
Confidentiality	100%	100%	100%
	Success Guarantee
Success Guarantee	100%	100%	100%
	Any Hidden Cost
Any Hidden Cost	$0.00	$0.00	$0.00
	Auto Recharge
Auto Recharge	No	No	No
	Updates Intimation
Updates Intimation	by Email	by Email	by Email
	Technical Support
Technical Support	Free	Free	Free
	OS Support
OS Support	Windows, Android, iOS, Linux	Windows, Android, iOS, Linux	Windows, Android, iOS, Linux

Show All Supported Payment Methods
Card Logo

VCE Exam Simulator

Sharing-and-Visibility-Architect
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 열린 네트워크 연결 목록
D. 실행중인 프로세스 목록
Answer: C

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. This is the designated router (DR) on the FastEthernet 0/0 link.
C. OSPF version 2 has been enabled to support IPv6.
D. The output was generated by the show ip interface command.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
Answer: E,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. access-list 2699 permit udp 10.20.1.0 0.0.0.255
D. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
Answer: D
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

CS0-003 Deutsch Prüfung
C-C4H51-2405 Probesfragen
300-810 Fragen Und Antworten
H13-527_V5.0 Antworten
GCX-WFM Testing Engine
1Z0-1095-23 Deutsch Prüfungsfragen
NSK100 Vorbereitung
H22-731_V1.0 Online Test
C_S4PPM_2021 Prüfung
250-589 Echte Fragen
MB-220 Testantworten
FC0-U71 Online Tests
API-577 Prüfungsfragen
H19-338_V3.0 Prüfungsmaterialien
API-510 Zertifizierung
C-S4CPB-2408 Zertifizierungsantworten
TCA-Tibco-BusinessWorks Testantworten
H13-511_V5.5 Online Test
C_C4H320_34 Deutsche
HPE0-V22 Ausbildungsressourcen
C_THR95_2311 Online Prüfung
MLS-C01 Zertifikatsdemo

VCE Exam Simulator Q&A	: 347
Q&A Update On	: January 3, 2019
File Format	: Installable Setup (.EXE)
Windows Compatibility	: Windows 10/8/7/Vista/2000/XP/98
Mac Compatibility	: Through Wine, Virtual Computer, Dual Boot
VCE Exam Simulator Software

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. This is the designated router (DR) on the FastEthernet 0/0 link.
C. OSPF version 2 has been enabled to support IPv6.
D. The output was generated by the show ip interface command.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
Answer: E,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

Sample Questions">Download
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

Sample Exam Simulator
VCE Exam Simulator Installation Guide

Insideopenoffice Exam Simulator is industry leading Test Preparation and Evaluation Software for
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

exam. Through our Exam Simulator we guarantee that when you prepare Sharing-and-Visibility-Architect
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

, you will be confident in all the topics of the exam and will be ready to take the exam any time. Our Exam Simulator uses braindumps and real questions to prepare you for exam. Exam Simulator maintains performance records, performance graphs, explanations and references (if provied). Automated test preparation makes much easy to cover complete pool of questions in fastest way possible. Exam Simulators are updated on regular basis so that you can have best test preparation. Pass4sure with Industry Leading Exam Simulator.

Buy Full Version (Limited time Discount offer)

Compare Price and Packages


	3 Months Download Account	6 Months Download Account	1 Year Download Account
	Was 97 $ 39.00 A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1 B. This is the designated router (DR) on the FastEthernet 0/0 link. C. OSPF version 2 has been enabled to support IPv6. D. The output was generated by the show ip interface command. E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command. F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808. Answer: E,F Explanation: OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network. The following describes the steps to configure OSPF for IPv6: There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command. NEW QUESTION: 4 展示を参照してください。ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？ A. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22 B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22 C. access-list 2699 permit udp 10.20.1.0 0.0.0.255 D. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255 Answer: D Explanation: Explanation Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255. VCE Exam Simulator with 3 Months Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now or try it free	Was 121 48.00 A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1 B. This is the designated router (DR) on the FastEthernet 0/0 link. C. OSPF version 2 has been enabled to support IPv6. D. The output was generated by the show ip interface command. E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command. F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808. Answer: E,F Explanation: OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network. The following describes the steps to configure OSPF for IPv6: There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command. NEW QUESTION: 4 展示を参照してください。ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？ A. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22 B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22 C. access-list 2699 permit udp 10.20.1.0 0.0.0.255 D. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255 Answer: D Explanation: Explanation Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255. VCE Exam Simulator with 6 Months Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now or try it free	Was 146 97.00 A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1 B. This is the designated router (DR) on the FastEthernet 0/0 link. C. OSPF version 2 has been enabled to support IPv6. D. The output was generated by the show ip interface command. E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command. F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808. Answer: E,F Explanation: OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network. The following describes the steps to configure OSPF for IPv6: There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command. NEW QUESTION: 4 展示を参照してください。ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？ A. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22 B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22 C. access-list 2699 permit udp 10.20.1.0 0.0.0.255 D. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255 Answer: D Explanation: Explanation Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255. VCE Exam Simulator with 1 Year Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now or try it free
	File Format
File Format	VCE Include PDF	VCE Include PDF	VCE Include PDF
	Instant download Access
Instant download Access	✔	✔	✔
	Comprehensive Q&A
Comprehensive Q&A	✔	✔	✔
	Success Rate
Success Rate	98%	98%	98%
	Real Questions
Real Questions	✔	✔	✔
	Updated Regularly
Updated Regularly	✔	✔	✔
	Portable Files
Portable Files	✔	✔	✔
	Unlimited Download
Unlimited Download	✔	✔	✔
	100% Secured
100% Secured	✔	✔	✔
	Confidentiality
Confidentiality	100%	100%	100%
	Success Guarantee
Success Guarantee	100%	100%	100%
	Any Hidden Cost
Any Hidden Cost	$0.00	$0.00	$0.00
	Auto Recharge
Auto Recharge	No	No	No
	Updates Intimation
Updates Intimation	by Email	by Email	by Email
	Technical Support
Technical Support	Free	Free	Free
	OS Support
OS Support	Windows, Mac (through Wine)	Windows, Mac (through Wine)	Windows, Mac (through Wine)

Show All Supported Payment Methods
Card Logo

Preparation Pack (PDF + Exam Simulator)

Sharing-and-Visibility-Architect
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 열린 네트워크 연결 목록
D. 실행중인 프로세스 목록
Answer: C

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. This is the designated router (DR) on the FastEthernet 0/0 link.
C. OSPF version 2 has been enabled to support IPv6.
D. The output was generated by the show ip interface command.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
Answer: E,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. access-list 2699 permit udp 10.20.1.0 0.0.0.255
D. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
Answer: D
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Insideopenoffice Preparation Pack contains Pass4sure Real Sharing-and-Visibility-Architect
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

Questions and Answers and Exam Simulator. Insideopenoffice is the competent Exam Preparation and Training company that will help you with current and up-to-date training materials for Sharing-and-Visibility-Architect Certification Exams. Authentic
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

Braindumps and Real Questions are used to prepare you for the exam.
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

Exam PDF and Exam Simulator are continuously being reviewed and updated for accuracy by our Sharing-and-Visibility-Architect test experts. Take the advantage of Insideopenoffice
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

authentic and updated Questons and Answers with exam simulator to ensure that you are 100% prepared. We offer special discount on preparation pack. Pass4sure with Real exam Questions and Answers

Preparation Pack Includes

Pass4sure PDF

Sharing-and-Visibility-Architect
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 열린 네트워크 연결 목록
D. 실행중인 프로세스 목록
Answer: C

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. This is the designated router (DR) on the FastEthernet 0/0 link.
C. OSPF version 2 has been enabled to support IPv6.
D. The output was generated by the show ip interface command.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
Answer: E,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. access-list 2699 permit udp 10.20.1.0 0.0.0.255
D. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
Answer: D
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

(
CS0-003 Deutsch Prüfung
C-C4H51-2405 Probesfragen
300-810 Fragen Und Antworten
H13-527_V5.0 Antworten
GCX-WFM Testing Engine
1Z0-1095-23 Deutsch Prüfungsfragen
NSK100 Vorbereitung
H22-731_V1.0 Online Test
C_S4PPM_2021 Prüfung
250-589 Echte Fragen
MB-220 Testantworten
FC0-U71 Online Tests
API-577 Prüfungsfragen
H19-338_V3.0 Prüfungsmaterialien
API-510 Zertifizierung
C-S4CPB-2408 Zertifizierungsantworten
TCA-Tibco-BusinessWorks Testantworten
H13-511_V5.5 Online Test
C_C4H320_34 Deutsche
HPE0-V22 Ausbildungsressourcen
C_THR95_2311 Online Prüfung
MLS-C01 Zertifikatsdemo
)

Questions and Answers	: 347
Q&A Update On	: January 3, 2019
File Format	: PDF
Windows Compatibility	: Windows 10/8/7/Vista/2000/XP/98
Mac Compatibility	: All Versions including iOS 4/5/6/7
Android	: All Android Versions
Linux	: All Linux Versions
	A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1 B. This is the designated router (DR) on the FastEthernet 0/0 link. C. OSPF version 2 has been enabled to support IPv6. D. The output was generated by the show ip interface command. E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command. F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808. Answer: E,F Explanation: OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network. The following describes the steps to configure OSPF for IPv6: There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command. NEW QUESTION: 4 展示を参照してください。ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？ A. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22 B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22 C. access-list 2699 permit udp 10.20.1.0 0.0.0.255 D. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255 Answer: D Explanation: Explanation Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255. Sample Questions">Download E. ip as-path access-list permit local-as ip as-path access-list deny * F. ip as-path access-list permit _$ Answer: C Explanation: Explanation/Reference: Explanation: NEW QUESTION: 2 다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까? A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다. B. APP (Address Resolution Protocol) 테이블을 표시하십시오. C. 열린 네트워크 연결 목록 D. 실행중인 프로세스 목록 Answer: C NEW QUESTION: 3 Refer to the exhibit. What two statements are true? (Choose two.) A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1 B. This is the designated router (DR) on the FastEthernet 0/0 link. C. OSPF version 2 has been enabled to support IPv6. D. The output was generated by the show ip interface command. E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command. F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808. Answer: E,F Explanation: OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network. The following describes the steps to configure OSPF for IPv6: There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command. NEW QUESTION: 4 展示を参照してください。ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？ A. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22 B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22 C. access-list 2699 permit udp 10.20.1.0 0.0.0.255 D. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255 Answer: D Explanation: Explanation Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255. Sample Questions

VCE Exam Simulator Software

Sharing-and-Visibility-Architect
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 열린 네트워크 연결 목록
D. 실행중인 프로세스 목록
Answer: C

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. This is the designated router (DR) on the FastEthernet 0/0 link.
C. OSPF version 2 has been enabled to support IPv6.
D. The output was generated by the show ip interface command.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
Answer: E,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. access-list 2699 permit udp 10.20.1.0 0.0.0.255
D. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
Answer: D
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

(
CS0-003 Deutsch Prüfung
C-C4H51-2405 Probesfragen
300-810 Fragen Und Antworten
H13-527_V5.0 Antworten
GCX-WFM Testing Engine
1Z0-1095-23 Deutsch Prüfungsfragen
NSK100 Vorbereitung
H22-731_V1.0 Online Test
C_S4PPM_2021 Prüfung
250-589 Echte Fragen
MB-220 Testantworten
FC0-U71 Online Tests
API-577 Prüfungsfragen
H19-338_V3.0 Prüfungsmaterialien
API-510 Zertifizierung
C-S4CPB-2408 Zertifizierungsantworten
TCA-Tibco-BusinessWorks Testantworten
H13-511_V5.5 Online Test
C_C4H320_34 Deutsche
HPE0-V22 Ausbildungsressourcen
C_THR95_2311 Online Prüfung
MLS-C01 Zertifikatsdemo
)

VCE Exam Simulator Q&A	: 347
Q&A Update On	: January 3, 2019
File Format	: Installable Setup (.EXE)
Windows Compatibility	: Windows 10/8/7/Vista/2000/XP/98
Mac Compatibility	: Through Wine, Virtual Computer, Dual Boot
Download Software	VCE Exam Simulator Software
	A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1 B. This is the designated router (DR) on the FastEthernet 0/0 link. C. OSPF version 2 has been enabled to support IPv6. D. The output was generated by the show ip interface command. E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command. F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808. Answer: E,F Explanation: OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network. The following describes the steps to configure OSPF for IPv6: There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command. NEW QUESTION: 4 展示を参照してください。ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？ A. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22 B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22 C. access-list 2699 permit udp 10.20.1.0 0.0.0.255 D. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255 Answer: D Explanation: Explanation Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255. Sample Questions">Download E. ip as-path access-list permit local-as ip as-path access-list deny * F. ip as-path access-list permit _$ Answer: C Explanation: Explanation/Reference: Explanation: NEW QUESTION: 2 다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까? A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다. B. APP (Address Resolution Protocol) 테이블을 표시하십시오. C. 열린 네트워크 연결 목록 D. 실행중인 프로세스 목록 Answer: C NEW QUESTION: 3 Refer to the exhibit. What two statements are true? (Choose two.) A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1 B. This is the designated router (DR) on the FastEthernet 0/0 link. C. OSPF version 2 has been enabled to support IPv6. D. The output was generated by the show ip interface command. E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command. F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808. Answer: E,F Explanation: OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network. The following describes the steps to configure OSPF for IPv6: There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command. NEW QUESTION: 4 展示を参照してください。ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？ A. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22 B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22 C. access-list 2699 permit udp 10.20.1.0 0.0.0.255 D. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255 Answer: D Explanation: Explanation Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255. Sample Exam Simulator	VCE Exam Simulator Installation Guide

Buy Full Version (Limited time Discount offer)

Compare Price and Packages


	3 Months Download Account	6 Months Download Account	1 Year Download Account
	Was 122 $ 49.00 A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1 B. This is the designated router (DR) on the FastEthernet 0/0 link. C. OSPF version 2 has been enabled to support IPv6. D. The output was generated by the show ip interface command. E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command. F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808. Answer: E,F Explanation: OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network. The following describes the steps to configure OSPF for IPv6: There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command. NEW QUESTION: 4 展示を参照してください。ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？ A. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22 B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22 C. access-list 2699 permit udp 10.20.1.0 0.0.0.255 D. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255 Answer: D Explanation: Explanation Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255. PDF and VCE Exam Simulator with 3 Months Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now or try it free	Was 153 61.00 A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1 B. This is the designated router (DR) on the FastEthernet 0/0 link. C. OSPF version 2 has been enabled to support IPv6. D. The output was generated by the show ip interface command. E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command. F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808. Answer: E,F Explanation: OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network. The following describes the steps to configure OSPF for IPv6: There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command. NEW QUESTION: 4 展示を参照してください。ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？ A. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22 B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22 C. access-list 2699 permit udp 10.20.1.0 0.0.0.255 D. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255 Answer: D Explanation: Explanation Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255. PDF and VCE Exam Simulator with 6 Months Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now or try it free	Was 183 122.00 A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1 B. This is the designated router (DR) on the FastEthernet 0/0 link. C. OSPF version 2 has been enabled to support IPv6. D. The output was generated by the show ip interface command. E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command. F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808. Answer: E,F Explanation: OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network. The following describes the steps to configure OSPF for IPv6: There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command. NEW QUESTION: 4 展示を参照してください。ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？ A. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22 B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22 C. access-list 2699 permit udp 10.20.1.0 0.0.0.255 D. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255 Answer: D Explanation: Explanation Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255. PDF and VCE Exam Simulator with 1 Year Download Account" rel="nofollow" class="price-buy" target="_blank">Buy Now or try it free
	File Format
File Format	PDF & VCE	PDF & VCE	PDF & VCE
	Instant download Access
Instant download Access	✔	✔	✔
	Comprehensive Q&A
Comprehensive Q&A	✔	✔	✔
	Success Rate
Success Rate	98%	98%	98%
	Real Questions
Real Questions	✔	✔	✔
	Updated Regularly
Updated Regularly	✔	✔	✔
	Portable Files
Portable Files	✔	✔	✔
	Unlimited Download
Unlimited Download	✔	✔	✔
	100% Secured
100% Secured	✔	✔	✔
	Confidentiality
Confidentiality	100%	100%	100%
	Success Guarantee
Success Guarantee	100%	100%	100%
	Any Hidden Cost
Any Hidden Cost	$0.00	$0.00	$0.00
	Auto Recharge
Auto Recharge	No	No	No
	Updates Intimation
Updates Intimation	by Email	by Email	by Email
	Technical Support
Technical Support	Free	Free	Free

Show All Supported Payment Methods
Card Logo

E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 열린 네트워크 연결 목록
D. 실행중인 프로세스 목록
Answer: C

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. This is the designated router (DR) on the FastEthernet 0/0 link.
C. OSPF version 2 has been enabled to support IPv6.
D. The output was generated by the show ip interface command.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
Answer: E,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. access-list 2699 permit udp 10.20.1.0 0.0.0.255
D. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
Answer: D
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Questions and Answers

E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 열린 네트워크 연결 목록
D. 실행중인 프로세스 목록
Answer: C

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. This is the designated router (DR) on the FastEthernet 0/0 link.
C. OSPF version 2 has been enabled to support IPv6.
D. The output was generated by the show ip interface command.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
Answer: E,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. access-list 2699 permit udp 10.20.1.0 0.0.0.255
D. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
Answer: D
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

Related Links

Customers Feedback about
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION: 2
다음 중 컴퓨터에서 예상되는 맬웨어의 소스 인터넷 프로토콜 (IP) 주소를 식별하는데 도움이 되는 것은 무엇입니까?
A. TCP / IP (Transmission Control Protocol / Internet Protocol) 네트워크 구성 정보를 표시합니다.
B. APP (Address Resolution Protocol) 테이블을 표시하십시오.
C. 열린 네트워크 연결 목록
D. 실행중인 프로세스 목록
Answer: C

NEW QUESTION: 3
Refer to the exhibit. What two statements are true? (Choose two.)

A. The router was configured with the commands: router ospf 1 network 172.16.6.0 0.0.0.255 area 1
B. This is the designated router (DR) on the FastEthernet 0/0 link.
C. OSPF version 2 has been enabled to support IPv6.
D. The output was generated by the show ip interface command.
E. Interface FastEthernet 0/0 was configured with the ipv6 ospf 1 area 1 command.
F. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.
Answer: E,F
Explanation:
OSPFv3 supports IPv6. The configuration of OSPFv3 is not a subcommand mode of the router ospf command as it is in OSPFv2 configuration. For example, instead of using the network area command to identify networks that are part of the OSPFv3 network, the interfaces are directly configured to specify that IPv6 networks are part of the OSPFv3 network.
The following describes the steps to configure OSPF for IPv6:

There are several commonly used OSPFv3 show commands, including the show ipv6 ospf [ process-id] [area-id] interfacee [interface] command.

NEW QUESTION: 4
展示を参照してください。

ネットワーク管理者は、ネットワーク内のルーターをリモート管理するためにSSHアクセスを許可する必要があります。運用チームは10.20.1.0/25ネットワーク上にあります。どのコマンドがこのタスクを実行しますか？
A. アクセスリストなし2699はtcpを拒否します10.20.1.0 0.0.0.127 eq 22
B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
C. access-list 2699 permit udp 10.20.1.0 0.0.0.255
D. アクセスリストなし2699 deny ip any 10.20.1.0 0.0.0.255
Answer: D
Explanation:
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

"Benedict Says : A few tremendous news is that I exceeded
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

check the day past... I thank whole killexams.Com institution. I certainly respect the amazing paintings that you All do... Your schooling cloth is notable. Maintain doing appropriate paintings. I will actually use your product for my next exam. Regards, Emma from the large apple"

"Dingxiang Says : After a few weeks of
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

preparation with this Insideopenoffice set, I passed the
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

exam. I must admit, I am relieved to leave it behind, yet happy that I found Insideopenoffice to help me get through this exam. The questions and answers they include in the bundle are correct. The answers are right, and the questions have been taken from the real
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

exam, and I got them while taking the exam. It made things a lot easier, and I got a score somewhat higher than I had hoped for."

"Christopher Says : I handed the
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

exam. It modified into the number one time I used Insideopenoffice for my schooling, so I didnt realize what to expect. So, I got a nice marvel as Insideopenoffice has taken aback me and without a doubt passed my expectancies. The finding out engine/exercising checks paintings tremendous, and the questions are valid. Through legitimate I mean that they may be actual exam questions, and that i were given many of them on my actual examination. Very dependable, and i used to be left with first-rate impressions. Id now not hesitate to propose Insideopenoffice to my colleagues."

"Chandler Says : I handed the
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

examination and highly endorse Insideopenoffice to everyone who considers buying their substances. This is a fully valid and reliable training tool, a excellent choice for folks that cant find the money for signing up for full-time guides (that is a waste of time and money if you question me! Especially if you have Insideopenoffice). In case you have been thinking, the questions are actual!"

"Brigham Says : Before I stroll to the sorting out middle, i was so assured approximately my education for the
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

examination because of the truth I knew i used to be going to ace it and this confidence came to me after the use of this killexams.Com for my assistance. It is brilliant at supporting college students much like it assisted me and i was capable of get desirable ratings in my
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

take a look at."

"Chenglei Says : I spent enough time studying these materials and passed the
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

exam. The stuff is good, and whilst those are braindumps, meaning these substances are constructed at the real exam stuff, I dont apprehend folks who try to bitch aboutthe
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

questions being exceptional. In my case, now not all questions were one hundred% the equal, but the topics and widespread approach had been surely accurate. So, buddies, if you take a look at tough sufficient youll do just fine."

"Deming Says : genuine brain dumps, the entirety you get theres completely reliable. I heard right reviews on killexams, so i purchasedthis to prepare for my
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

examination. everything is as desirable as they promise, exact nice, smooth exerciseexamination. I handed
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

with ninety six%."

"Malcolm Says : Just cleared
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

exam with top score and have to thank killexams.com for making it possible. I used
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

exam simulator as my primary information source and got a solid passing score on the
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

exam. Very reliable, Im happy I took a leap of faith purchasing this and trusted killexams. Everything is very professional and reliable. Two thumbs up from me."

"Crosby Says : Great insurance of
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

examination principles, so I found out precisely what I wanted in the path of the
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

exam. I exceedingly suggest this education from killexams.Com to virtually all and sundry making plans to take the
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

exam."

"Chuanli Says : I wanted to inform you that during past in idea that id in no way be able to pass the
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

take a look at. however after Itake the
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

education then I came to recognise that the online services and material is the quality bro! And when I gave the checks I passed it in first attempt. I informed my pals approximately it, additionally they beginning the
E. ip as-path access-list permit local-as
ip as-path access-list deny *
F. ip as-path access-list permit _$
Answer: C
Explanation:
Explanation/Reference:
Explanation:

education shape right here and locating it truely exquisite. Its my pleasant experience ever. thank you"